More on the results of vacuum pumps:

High Vacuum Sintering Furnace Stove

Vacuum atmosphere furnace, also known as anaerobic annealing furnace, vacuum atmosphere sintering furnace, the object access to certain gas-open vacuum. 3, the way to open the door for the 180-degree axial open, the door can be rotated 360 degrees to avoid the high temperature when the oven door to the inside...<<more>>

Vacuum Sintering Furnace - SIMUWU Vacuum Furnace

Vacuum Sintering Furnace. Vacuum sintering, refers to the process that making the powder material into dense material in the condition of the vacuum.People use this process to produce ceramics, powder metallurgy, refractories, ultra-high temperature materials....<<more>>

Silicon carbide reaction sintering furnace – northvacuum

In order to reduce the amount of vacuum furnace maintenance during the sintering process of silicon carbide, our company has specially developed a new structure of vacuum furnace suitable for silicon carbide reaction sintering in order to reduce the production cost (purchasing cost and labor cost) of users....<<more>>

6.10: Sintering Furnaces | Engineering360

In addition to box-type furnaces, bell-type furnaces are also used for batch-type sintering of metal powder compacts, particularly in cases when very good atmosphere control is required. Figure 6.16 shows a typical bell-type furnace....<<more>>

Vacuum sintering - ScienceDirect

Limited sintering of molybdenum and tungsten occurs in vacuum since these alloys are essentially inert to hydrogen gas (i.e. do not form hydrides), so the reducing power of hydrogen can be used and the furnace design for this type of sintering is simpler....<<more>>

Cemented carbide sintering furnace – sintering process

Vacuum sintering: compared with hydrogen sintering, vacuum sintering mainly to several advantages, first of all, vacuum sintering can very good control product ingredients, in 1.3 ~ 133 pa pressure, carbon and oxygen in the atmosphere and alloy between the exchange rate is very low....<<more>>

Sintering and Corrosion Resistance - ASM International

THE PRIMARYGOAL in stainless steel sintering is to obtain good corrosion resistance along with good mechanical properties and adequate dimen-sional tolerances....<<more>>

Design and Operation of a One-Chamber Vacuum Furnace for

The workhorse of the industry today is semi-batch equipment, carousel-like, in which loads are lowered from a loading chamber onto an indexing table in a large cylindrical vacuum tank, and successively rotated and raised into a dewax furnace, then a sinter furnace, and into cooling, before being finally unloaded from the initial loading chamber....<<more>>

Hydrogen sintering of titanium and its alloys - ScienceDirect

10.1. Introduction. Hydrogen sintering and phase transformation (HSPT) is a blended elemental (BE) press and sinter process for the production of titanium alloys , .During this process, compacts of hydrogenated titanium, metallic titanium, and/or master alloy powders are sintered under a dynamically controlled hydrogen partial pressure....<<more>>

Continuous Vacuum Furnaces: Pusher Furnaces | Centorr Vacuum

Description. Centorr/Vacuum Industries graphite pusher furnace design incorporates a variable speed pusher, optional atmosphere debinding furnace, high temperature sintering furnace, cooling tunnel, load locks, and work box unloading system....